 |
| Quantity: | |
|---|---|
Product Description
Applications
1. Converter Steelmaking
1) Converter tilting: Molten steel slag is discharged and collected in slag pots;
2) Transport to hot-pouring slag yard: Slag is dumped and cooled via water spraying;
3) Magnetic separation: Residual steel is recovered from the slag; processed steel slag is used for roadbeds and construction material feedstock.
2. Ironmaking Blast Furnace
Receives molten blast furnace slag (1300-1450°C) and transports it via overhead crane and rail to the slag yard:
1) Water granulation: Slag is granulated for use as cement raw material;
2) Dry slag stockpiling: Slag is stored for subsequent processing into construction materials.
3. Electric Arc Furnace (EAF) & Refining Furnace
1) Slag discharge from EAF steelmaking;
2) Desulfurization slag from LF (Ladle Furnace) refining;
3) Residual slag from continuous casting ladles (molten slag remaining at the bottom of the ladle); all are collected in slag pots and transported.
performance
1. The main body is primarily made of ZG230-450 cast steel (or ZG270-500/low-alloy cast steel for severe operating conditions), while the trunnions are made of forged alloy steel (20CrMo/35CrMo) to ensure strength superior to that of the main body.
2. Thermal shock resistance:
Withstands repeated contact with molten slag at 1200-1500°C and rapid cooling after slag dumping; resists thermal fatigue and retards crack formation.
3. Resistant to molten slag erosion and chemical corrosion; strict control of harmful impurities (S, P) to reduce the tendency for hot cracking.
4. The casting undergoes full annealing to eliminate internal casting stresses; critical areas are inspected using Magnetic Particle Testing (MT) and Ultrasonic Testing (UT) to detect any cracks or defects.
Product Parameters
Product Parameters
Process
1. High-temperature liquid slag discharges from the furnace mouth into a slag pot;
2. An overhead crane lifts the slag pot, and a rail transfer car transports it;
3. It is transported to the slag processing workshop or slag yard;
4. The overhead crane tilts the slag pot to dump out the red-hot molten slag (using methods such as hot pouring, water spraying for cooling, or water quenching);
5.After cooling, the empty slag pot is returned to the furnace area for reuse.
